Language

PRODUCTS

Product Series

Q254-250 (SSW40) Pneumatic Make-up and Break-out Tong

Модель продукта:

010

Product summary：

This tong serves as an alternative to traditional spinning ropes or chains, facilitating mechanized make-up operations in oilfields. It accommodates a wide range of pipe diameters, which can be adjusted as needed. The clamping mechanism is available in two configurations: airbag and cylinder-based. The drive and control systems support both pneumatic and hydraulic modes. This tong is designed in compliance with API Spec 7K standards.

Category:

Q Series Make-up and Break-out Tongs

keywords:

Силовые зажимы для бурильной трубы | Силовые зажимы двойного назначения

Product message

Product Details

Technical specifications of the twist pliers:

Model		Q140-200（SSW10）	Q254-250（SSW40）	Q254-300Y
Drive Mode		Pneumatic		Hydraulic
Applicable Pipe Diameter	mm	73~139.7	73-254	73-254
Applicable Pipe Diameter	in	2⁷/₈-5¹/₂	2⁷/₈-10	2⁷/₈-10
Working Air Pressure	MPa	0.5-0.9	0.5-0.9
Working Air Pressure	psi	72-130	72-130
Hydraulic System Rated Pressure	Mpa			14
Hydraulic System Rated Pressure	psi			2000
Maximum Braking Torque	Nm	2000	2500	3000
Maximum Braking Torque	Ft.lbf	1475	1840	2210
Spinning Speed	RPM	0-90	0-120	0-95
Gas Consumption	m3/min	10.3	15
Gas Consumption	ft3/min	360	529
Hydraulic System Flow	LPM			120-140
Hydraulic System Flow	GPM			32-37
Dimensions	mm	1400×530×835	1250×570×465	1100×560×700
Dimensions	in	55×21×33	49×23×18	44×23×28
质量	Kg	378	440	400
质量	lb	833	971	880